Viewsonic IFP
Install Intel Graphic driver
No signal message on IFP screen when connected to an external source
Using the viewsonic remote control, press the Input or Source button and check whether you are on the correct input. If the correct input is selected and there’s still no signal, check the source where the signal is coming from. Some models have both HDMI 2.0 and HDMI 1.4 Inputs. Plugging an HDMI 2.0 signal to an HDM…
myViewBoard Software
Viewsonic has suggested to using myViewboard instead of vBoard or vBoard Lite as they are phasing it out. The software can be downloaded from: Set up of myViewBoard - Done by someone with Admin Privileges logged on to staff member's account * When you go to this site you will see the following: * Click on the…
ViewSonic IFP - Extended Display Calibration
If the ViewSonic's touch capability in Extended Desktop mode is "off" you need to fix the setting in Windows. To fix those settings do the following: * Click on the Windows Charm on the bottom left and type "Control Panel" in the search then click on Control Panel in the list that appears. * Then tap or click Ha…
Viewsonic Buttons Locked
To lock and unlock the buttons found at the bottom of your IFP other then the power button price volume down twice, the gear once, and the home button once in sequence. (When locked the only button that will work is the power button the other buttons will be inoperable.) To lock and unlock the Power Button pres…
ViewSonic IFP - Non-functioning Touch
If you have a ViewSonic Interactive Flat Panel display that is not responding to touch it could be that the "touch" feature has been inadvertently disabled. To re-enable the "touch" capability do the following: On the front of the display on the bottom right are a series of buttons: * Press the "Volume Up" butt…
